When Vector scope button is selected the vector scope instrument is displayed to check if everything is connected correctly.
The Vector scope shows the phasors of voltage and current. In addition also the RMS values of voltage and current, the phase angles and the power values are shown. It is also possible to show the phasors for three phase systems.
Phasors for voltage and current:
- 1 phase
- 2 phase
- 3 phase
Example for Single phase system:
Only for this example the current of I1 is colored YELLOW. Normally Ux & Ix of Lx are the same color.
Principle example for Three phase system (each single phase line is displayed in different color):