Single phase outputs
To display all channels go to second tab (Setup) in edit module section and select the Channel list from the drop down menu.
Basic output channels
If no additional options are checked Dewesoft automatically creates following output channels:
Current channels = disabled
To ‘Used’ analog channels voltage (U_H1 and U_rms) and frequency channels are added.
Current channels = enabled
To basic channels emphasized channels are added -> current and power channels.
NOTE: H1 harmonics channels are created anyway for: voltage and current channels (U and I) and power channels (P, Q, S, phi, cos phi).
Harmonics output channels
Dewesoft creates following harmonic output channels for Single phase Power module (example for 3 harmonics and Current channels choice = enabled):
To basic channels for All Harmonics emphasized channels are added -> current and power harmonics channels.
When Current channels are disabled, current channels are not created (e.g. above only U_… channels).
To basic channels for Even Harmonics emphasized channels are added.
In above example odd channels are not created (except …_H1 -> see note above).
Additional harmonics output channels
When phase angles, P,Q, Impedance and Interharmonics option is selected, Dewesoft create following additional harmonics output channels if:
a) phase anglesoption is checked
To basic channels for All Harmonics (see above left) emphasized phase angles pfi channels for each harmonic are added:
For Even Harmonics odd channels are not created (except …_H1 -> see note above).
b) P,Q option is checked
To basic channels for All Harmonics (see above left) emphasized P - active power and Q - reactive power channels for each harmonic are added:
For Even Harmonics odd channels are not created (except …_H1 -> see note above).
c) Impedanceoption is checked
To basic channels for All Harmonics (see above left) emphasized Impedance Z channels are added
For Even Harmonics odd channels are not created.
d) Interharmonicsoption is checked
To basic channels for All Harmonics (see above left) emphasized Interharmonics …_IH channels are added
For Even Harmonics odd channels are not created.
THD outputs
To basic channels emphasized THD channels are added (not only for voltage and current but also their odd and even harmonics.
Period value outputs
To create period values output channels, periods (Power) option must be checked.
To basic channels emphasized period values …per channels are added (not only for voltage and current but also for all powers: S - apparent, P - active, Q - reactive).
Flicker output
To create flicker output channels, Voltage flicker and Flicker emission (Power quality) option must be checked.
To basic channels emphasized flicker (powers) P… channels are added.
