Digital in

The Digital input channels are used to measure only two states of the inputs: low and high. It is useful for measurement of status signals, for example relays.

For instructions on how to Add new module see  -> Setup -> Add module.

When you select a Digital input tab on Dewesoft Ch.setup screen, a similar window will appear:

Din_Module

For information about Channel grid see -> Setup -> Channel grid.

Channel setup for input channel

Press Setup to do the base Digital input settings in Channel setup window:

Din_Setup

  • General parameters - are similar to the analog input channel settings and contain the Channel name, Units, Color, Min and Max value. see -> Analog (in) Channel Setup.
  • DI settings - We can define the signal filter (similar like counters) in this section.
  • Current value - Displays digital value (0 or 1) of current Digital input channel.